Concrete Lifting & Foundation Repair

Lifted in a day.
Guaranteed for years.

Poly Flow raises sunken driveways, patios, and floors with polyurethane foam. We test the soil before we quote, and most jobs finish the same day.

Family owned in Nampa. We test before we quote.
Residential concrete driveway and garage apron with visible slab joints
5 yrNo settle guarantee
FreeOn-site estimates
Same dayBack on your driveway
TestedSoil measured before we quote
What we fix

Four problems, one cause

Concrete does not fail on its own. The soil under it moves. We test what is underneath, lift what sank, and seal out the water that started it.

Driveways & Walkways

Sunken panels, trip hazards, and slabs that dropped at the seams, raised back to grade.

Garage & Shop Floors

Interior slabs lifted through small ports drilled in the surface. No demolition, no replacement.

Foundation Settlement

Stair step cracks, sticking doors, and out of level floors, corrected with piers, jacks, or deep injection.

Cracks, Joints & Voids

Washed out soil filled and joints sealed so water stops undermining the slab.

Why it happens

Why concrete settles in the Treasure Valley

Concrete almost never fails on its own. It fails because the soil underneath moves, and soil in this valley moves for reasons specific to where we live.

Irrigation and canal water

The valley is threaded with canals, laterals, and drains. Seasonal wetting and drying moves fine material through the sub base, and leaks wash out support under nearby slabs. Properties on flood irrigation settle differently than properties on city water.

Fill that was never fully compacted

When a lot gets graded and backfilled quickly, compaction can come up short. The shortfall does not show until a few years of load and moisture cycling have compressed the fill, which is why newer subdivisions produce as many calls as older neighborhoods.

Silt soils that lose strength when wet

Much of the valley sits on wind deposited silt with low cohesion once saturated. A downspout dumping at a foundation corner or a leaking sprinkler line is enough to drop bearing capacity in one spot. That is the single sunken panel most homeowners notice first.

Freeze and thaw cycling

Our winters cycle in and out of freezing rather than staying frozen. Each cycle expands and contracts moisture in the sub base and in existing cracks, widening joints and loosening support a little more each year.

Erosion around water structures

Dams, cisterns, headgates, retaining walls, and stem walls in contact with moving water lose backfill steadily. By the time a void shows at the surface it is usually larger underneath.

Illustration of material injected through a small port to fill a void beneath a concrete slab
How it works

Four steps, one visit

1.

Free on-site estimate

We look at the problem in person and take penetrometer readings to measure the soil under your slab.

2.

Drill the ports

Ports about 5/8 inch across, placed in a pattern that lifts the slab evenly instead of cracking it.

3.

Inject and lift

High density polyurethane expands under the slab, fills the voids, and raises the concrete while we watch elevation.

4.

Patch and clean

Ports patched, site cleaned. Walk on it right away, drive on it the same day.

Customer reviews

What homeowners say

Great job fixed my issues and more. The guys were very helpful. Will make sure others know this can be done

Robert W.

Very professional, detail-oriented, meticulous and reliable. Polyflow is one of the rare, very reliable contractors in Treasure Valley. Can't recommend them highly enough.

Anthony U.

Pat and Cade were awesome. I have a colored and stamped concrete border around my patio that had sunk significantly over time. They used their innovative concrete lift to jack up the slab and then injected foam under pressure to support it. Very happy with results. To boot, these are just very enjoyable guys who do what they say they will do, when they say they will do it. Highly recommended.

Lee L.

Patrick and his Team arrived on schedule and performed our concrete lift flawlessly. The job was completed quickly, cleanly and professionally. They are amazingly smooth and a real art to watch as they work. It was a pleasure to work with Polyflow from our initial inquiry all the way through the completed work.

Ernie S.

I would highly recommend Polyflow. Patrick did a great job of explaining the process and followed through with a great product. They showed up on time and perform their work quickly, when they were done they cleaned up the job site.

Allen C.
Read more reviews on Google.
Project experience

Real work across the valley

See all case studies →
technicians working beside the concrete dam excavation (image 1)
Soil StabilizationMarsing, Idaho

Erosion Around a Concrete Dam

A homeowner built a concrete dam in a creek to create a pond for irrigation storage. During backfill, boulders and road mix were placed around the structure. Once the pond fi…

Read the project
grain-silo concrete crack and pressure-grouting work (image 1)
Crack and Joint SealingHomedale, Idaho

Grain Silo Waterproofing

Cracks at the base of grain bins were allowing water to enter the silo, causing grain rot and financial loss. Previous attempts using surface sealants and even spray foam coa…

Read the project
pump-house slab edge and exposed voided subbase (image 1)
Crack and Joint SealingEagle, Idaho

Cistron Water Leak Repair

This site presented two related issues. Water was leaking around the main pipe entering the cistern, escaping through concrete at the penetration. Over time, the leak caused…

Read the project

Find out what is under your slab

Estimates are free and done on site. We test the soil before we quote, so the price reflects the actual problem.