Homedale, Idaho Mar 18, 2026
Download project slidesCracks at the base of grain bins were allowing water to enter the silo, causing grain rot and financial loss. Previous attempts using surface sealants and even spray foam coatings failed to stop water migration through the concrete, so intrusion continued.
We removed the failed spray foam and thoroughly cleaned the cracks. We then drilled injection ports and performed pressure grouting using a water-activated polyurethane grout. By pre-wetting the crack, we encouraged the grout to chase water through the crack path, creating a sealed, waterproofed crack from within the concrete rather than a superficial coating.
Explore Crack and Joint Sealing →Water intrusion was addressed using an engineered pressure grouting method appropriate for active conditions. The sealed cracks helped protect stored grain and restore reliable performance of the silo.
We inspect the site and measure the soil before recommending a repair.
A homeowner built a concrete dam in a creek to create a pond for irrigation storage. During backfill, boulders and road mix were placed around the structure. Once the pond fi…
Read the projectThis site presented two related issues. Water was leaking around the main pipe entering the cistern, escaping through concrete at the penetration. Over time, the leak caused…
Read the projectEven with strong geotechnical planning, localized conditions can vary outside test areas. At this site, certain zones showed settlement in asphalt drive lanes and near storag…
Read the project